Tanker Desk – aka Lola Update

It had been over a year since I got the tanker desk and I did start working on a few pieces. Unfortunately, the project was just too big and too time consuming for me.

In order for this to have been successful, I seriously needed body shop equipment to take out the rust and the dings on this thing. Then when it came time to paint, a simple coat of spray primer and Rustoleum paint wasn’t going to cut it. I was quoted about $500 for powder coating which was one option. The other was to take it to get it painted but the shop never got back to me.

IMG_2702IMG_3555

It wasn’t an easy decision to give up on the project because I had already put some time and effort in disassembling. I had even started working on a couple of the drawers. As much as I wanted to continue, I also had to realize how big the desk was for my office and once it was reassembled, it wasn’t going to be moved.

IMG_4687


It’s now out in the curb. Sadly, this desk is most likely going to end up as scrap but there is always an off chance that someone will drive by, see it, and decide they want to make this into their pet project.

IMG_4877

Playing Musical Lights

Light #1

One of the things I realized, after getting the new front door, entry area needed to be kicked up a couple notches. Painting was one of the ideas (but that will probably happen later in the year).

The other idea was to get a new fixture. The original idea was a Sputnik/atomic style light similar to the picture below but instead of it being a semi-flush or chandelier, it would have been a flush mounted fixture.

IMG_4531

While doing research, I realized that something completely vintage was pretty pricey and would require wiring to be updated. Then I looked for a new version and was going to have one ordered but then it occurred to me that because it was going to be an entryway/foyer light, I wouldn’t get much use out if it.

So I began to rethink the idea and decided to order a chandelier for the dining room instead.

The before picture (this was an old one – probably a few months after I had moved in):

And the after:

IMG_4789

Right before I got the fixture and the 16 light bulbs, I changed out the dimmer switch. I hadn’t realized when I installed the switch a few years ago, that there were different ones for LED/CFLs and Incandescent/halogens.

Unfortunately, I didn’t buy the CORRECT one for the bulbs I was using. I ordered 2W filament LED bulbs and right on the box, it showed which dimmer switch it was compatible with. (The first clue was also how the flights flashed on and off—much like an alert—when I tried to brighten them.) It was also about three times as expensive because it was for low voltage bulbs.

Once I got that in, I moved the previous dimmer into the office.

So now, it is in a more prominent space and I use it every day.

Light #2:

Once I got the Sputnik chandelier up, I debated whether or not to move that fixture over to the entryway. It would require that I shorten the chain considerably which I had the tools. I wasn’t sure if it would look right as a semi-flush but was willing to try.

The previous light that I had installed not too long ago:

IMG_3755IMG_4500

The after:

IMG_4827

One thing I might end up adding later on is some sort of decorative piece before I attach the canopy. The size barely covered the junction box up there. That was a pretty simple install except I had to look for the instruction manual on this one because the wiring isn’t a simple black wire and then a white wire. This one had a ridged wire coating while the other was smooth.

Light #3

The hallway to the bedrooms had a CFL fixture which I wasn’t crazy about. Plus, it was only one light so it didn’t always seem like it was enough.

The before (this was the same style as the entry light before I made the changes):

IMG_3751 IMG_3752

Continuing with my own brand of repurposing, I used the light previous entry way light. This was probably the quickest install of the three. It was done in less than an hour. The fixture as well as the LED lights really made a big difference.

IMG_4892IMG_4890